Step by Step How to Take Care of Your Beanies

Step by Step How to Take Care of Your Beanies


Beanies are a popular and versatile accessory, perfect for keeping warm during colder months or adding a stylish touch to your outfit. Despite their simple appearance, beanies require proper care to maintain their shape, color, and texture. This guide will walk you through the essential steps to take care of your beanies, ensuring they remain in excellent condition for years to come.

How to Properly Clean Beanies

Cleaning your beanie correctly is essential not only for maintaining its appearance but also for prolonging its lifespan. Here’s an in-depth guide to help you navigate the process with ease.

Step 1: Read the Care Label

The care label is your go-to resource for understanding the specific requirements of your beanie's fabric. Take the time to read it thoroughly, as it contains valuable information on the recommended cleaning methods and potential limitations. By following the guidelines outlined on the label, you can ensure that you're treating your beanie with the care it deserves.

Step 2: Choose the Right Cleaning Method

The choice between hand washing and machine washing depends largely on the material of your beanie. Understanding the characteristics of different fabrics will help you determine the most suitable approach for cleaning.

Hand Wash:

Delicate materials such as wool, cashmere, or beanies with embellishments require gentle care to preserve their integrity. Hand washing allows for greater control over the cleaning process, minimizing the risk of damage.

Machine Wash:

For sturdier materials like cotton, acrylic, or polyester, machine washing can be a convenient option. However, it's essential to select the appropriate cycle and settings to prevent excessive agitation or shrinkage.

Step 3: Hand Washing Your Beanie

Fill a Basin:

Prepare a basin with lukewarm water and add a small amount of mild detergent formulated for delicate fabrics. Avoid using harsh chemicals or bleach, as they can cause damage.

Submerge the Beanie:

Gently immerse the beanie in the soapy water, ensuring that it is fully saturated. Allow it to soak for a few minutes to loosen any dirt or debris.

Swish and Soak:

Using your hands, gently agitate the water to distribute the detergent evenly and facilitate the cleaning process. Avoid excessive rubbing or scrubbing, as this can cause unnecessary wear and tear.

Rinse Thoroughly:

Once the beanie has been sufficiently cleaned, drain the soapy water and refill the basin with clean, lukewarm water. Rinse the beanie thoroughly to remove any remaining detergent residue.

Press Out Water:

To remove excess water from the beanie, avoid wringing or twisting, as this can distort its shape. Instead, gently press the fabric between your hands or against the side of the basin to squeeze out the water.

Step 4: Machine Washing Your Beanie

Use a Mesh Bag:

To protect your beanie from potential damage during the wash cycle, place it inside a mesh laundry bag. This will help prevent snagging or stretching, particularly for beanies with delicate embellishments.

Select Gentle Cycle:

When using a washing machine, opt for a gentle or delicate cycle with cold water. High temperatures and vigorous agitation can lead to shrinkage or distortion of the fabric, so it's essential to choose settings that minimize these risks.

Use Mild Detergent:

Choose a mild detergent specifically formulated for delicate fabrics, as harsh chemicals can cause damage or discoloration. Follow the manufacturer's instructions for the appropriate amount to use based on the size and soil level of your load.

Step 5: Drying Your Beanie

Lay Flat to Dry:

After washing, avoid hanging your beanie to dry, as this can cause it to stretch out of shape. Instead, lay it flat on a clean, dry towel or drying rack, ensuring that it retains its original dimensions.

Reshape as Needed:

While the beanie is still damp, gently reshape it to restore its original form. Pay attention to any areas that may have become misshapen during the washing process, such as the crown or brim.

Avoid Direct Heat:

To prevent damage to the fabric, refrain from exposing your beanie to direct sunlight or heat sources such as radiators or hairdryers. Excessive heat can cause the fibers to weaken or shrink, compromising the integrity of the garment. Allow your beanie to air dry naturally in a cool, well-ventilated area for best results.

FAQs (Frequently Asked Questions)

Q1: Can I put my beanie in the dryer?

It's highly advisable to steer clear of putting your beloved beanies in the dryer. The heat from the dryer can be detrimental, leading to shrinkage and potential damage to the fabric. To preserve the integrity of your beanie, opt for air drying by laying it flat on a clean surface.

Q2: How often should I wash my beanie?

The frequency of washing your beanie hinges on various factors such as how frequently you wear it and the nature of your activities while donning it. As a general rule, washing it once a month should suffice for regular maintenance. However, if your beanie becomes notably soiled or sweaty, it's best to give it a thorough cleanse.

Q3: Can I use regular detergent to wash my beanie?

It's advisable to exercise caution when selecting detergent for washing your beanie, especially if it's crafted from delicate fabrics like wool or cashmere. Opting for a mild detergent specifically formulated for delicate fabrics can help safeguard the fibers from potential damage. Regular detergents, known for their harsh chemicals, may prove too abrasive and compromise the integrity of your beanie.

Q4: How can I remove stains from my beanie?

Dealing with stains on your beanie requires a delicate touch and the right cleaning approach. Begin by spot-cleaning the affected area with a mild detergent and lukewarm water. Using a soft cloth or your fingers, gently rub the stain in a circular motion, taking care not to scrub too vigorously. Once the stain has lifted, rinse the area thoroughly to ensure no detergent residue remains.

Q5: Is it safe to bleach my beanie?

Bleaching your beanie is not advisable due to the potential risks it poses to the fabric's integrity. Bleach can weaken the fibers and lead to discoloration, ultimately diminishing the quality of your beloved accessory. To maintain the pristine condition of your beanie, it's best to stick to gentle cleaning methods and avoid harsh chemicals.

Q6: How can I prevent my beanie from stretching out?

Preventing your beanie from losing its shape requires proactive measures in handling and storage. Avoid hanging your beanie, especially when it's wet, as this can exert undue pressure on the fabric and cause stretching. Instead, lay it flat to dry on a clean surface. Additionally, handle your beanie with care, especially during washing and storage, to minimize the risk of distortion. Proper storage in a cool, dry place will help maintain its shape and prolong its lifespan.


Taking proper care of your beanie ensures it remains a stylish and functional accessory for years. By following the steps outlined in this guide, you can keep your beanies clean, fresh, and in excellent condition. Whether you prefer hand washing or machine washing, the key is to be gentle and attentive to the fabric’s needs. Remember to always check the care label and use mild cleaning agents to maintain the integrity of your beanie. With the right care, your beanie will continue to provide warmth and style, season after season.

If you are looking for your new adventure companion, check out Outer Wings and our handcrafted hat collection. Can't find something you like? Customize your hat to match your style perfectly.

Back to blog